Just a thought - check if your code segment is too large.
I had similar problems. My application's code segment size was very near to
the 64k.
It was running fine on the POSE and real devices, but I was not able to
debug it with the POSE (I didn't try debugging on the real device).
Now it's a multi segment project and works and debugs fine.
Bozidar
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mike
> Walters
> Sent: Tuesday, January 23, 2001 5:46 AM
> To: Palm Developer Forum
> Subject: Strange Upload error
>
>
> I am using CW R6 with the 3.5 upgrade (and patch level 1). I seem to be
> stuck in a strange state on a product I am developing. When I upload the
> program to the Palm for debugging, I get the following error:
>
> "Failed to upload application in Pilot device. Reset the device,
> delete the
> applicaiton, and try again to open the application on the host."
>
> I have tried performing soft and hard resets on the Palm, deleted the
> application from the Palm, and even re-loading the software (CW). I still
> get the error. I only get the error on this particular project.
> All of the
> others seem to work okay. Any ideas?
>
> By the way, after I get the error, if I change the category on the
> directory, then go back to the main directory, my application is there.
>
> Thanks,
>
> Mike Walters
> Rose Software
>
>
> --
> For information on using the Palm Developer Forums, or to
> unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/
>
>
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
