I'm not using DNS, I am using the IP addresses. I can surf the web, but when I try to use my own program, one that I wrote to connect to a telnet session it doesn't work. I found this error: "(GDB) set confirm off(GDB) target pilot localhost:21localhost:21: Invalid argument."
I don't know where it go localhost:21, I strictly use IP addresses, maybe this will give more clues, I hope. I am new to this, and as usual, I probably bit off more than I can chew right now, but usually I learn better that way, so bear with me and thanx for the help. thanx bill ----- Original Message ----- From: "Palm Dev Forum" <[EMAIL PROTECTED]> To: "Palm Developer Forum" <[EMAIL PROTECTED]> Sent: Friday, February 15, 2002 9:37 AM Subject: Re: Pose and netlib > Hey Bill, > > I think SebNob is right. Since you don't seem to have a local web server > you can access by IP, why not try this: > > on your desktop system which is on the same internet connection as POSE, go > to a dos prompt and type > > PING YAHOO.COM > > It will respond with 216.115.109.6 as the IP address of YAHOO.COM. (But do > this yourself anyway to make sure your connection is working right now and > YAHOO.COM is working right now.) > > Surf on POSE to that IP instead of typing in the www.yahoo.com and see what > happens. > > ------------------------------------------------------------------- > Gary Gorsline > Easy Business Software > ========================== End of Message ========================== > > ----- Original Message ----- > From: "bill" <[EMAIL PROTECTED]> > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > Sent: Friday, February 15, 2002 12:02 PM > Subject: Re: Pose and netlib > > > > One thing I noticed about the new pose is that you can actually change the > > "localhost" to a IP address:port, I was wonder, probably a stupid > question, > > but what would the port number be?? I used my host computer IP address > and > > the 6416 that they had in there, but it still won't work. > > thanx > > bill > > > > "SebNob" <[EMAIL PROTECTED]> wrote in message > > > news:LYRIS-45725-70158-2002.02.15-07.26.59--wlalexander#[EMAIL PROTECTED] > > lmos.com... > > > Hi bill > > > > > > Maybe it's a problem related to the DNS. I think that POSE doesn't > get > > > the DNS from the host computer. If you have a web server on your LAN, > try > > > accessing it by it's IP. Personnally i connect my POSE with a win RAS > and > > it > > > work fine. > > > > > > "bill" <[EMAIL PROTECTED]> a �crit dans le message news: > > > [EMAIL PROTECTED] > > > > > > > > I am just redirecting netlib to the TCP/IP stack of the host computer > > like > > > I > > > > am supposed to. I have no prroblem with the program on the palm it is > > > only > > > > when trying to use my cable connection, or even a modem connection, I > > > always > > > > get a time out error, it never works. Pose does not seem to know how > to > > > get > > > > to the internet. > > > > thanx > > > > bill > > > > > > > > ----- Original Message ----- > > > > From: "Palm Dev Forum" <[EMAIL PROTECTED]> > > > > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > > > > Sent: Thursday, February 14, 2002 7:19 PM > > > > Subject: Re: Pose and netlib > > > > > > > > > > > > > I'm sure someone, even me, might be able to give you some help, but > > you > > > > just > > > > > haven't told us enough about your problem. Yes, I've had Connection > > > Time > > > > > Outs with POSEr and Network connection to Internet. And it's worked > > > too. > > > > > We use CDPD modems, and when you are out of a service area or in a > > steel > > > > > building, you get them, too. Sometimes your ISP goes down, servers > > even > > > > go > > > > > down. You have to program for them. But I assume that you have > some > > > > other > > > > > problem. Can you give us some details please. > > > > > -------------------------------------------------------------------- > > > > > Gary Gorsline > > > > > Easy Business Software > > > > > ========================== End of Message ========================== > > > > > > > > > > ----- Original Message ----- > > > > > From: "bill" <[EMAIL PROTECTED]> > > > > > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > > > > > Sent: Thursday, February 14, 2002 5:31 PM > > > > > Subject: Pose and netlib > > > > > > > > > > > > > > > > Has anyone go the error Connection timed out when trying to test > an > > > > > > aplication on pose that uses to tcp/ip of the host computer to get > > to > > > > the > > > > > > internet... And if you have, did you fix it and if so...how??? > > > > > > thanx, I am desperate. > > > > > > bill > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > For information on using the Palm Developer Forums, or to > > unsubscribe, > > > > > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > > > > > > > > > > > > > > > > > -- > > > > > For information on using the Palm Developer Forums, or to > unsubscribe, > > > > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > > > > > > > > > > > > > > > > > > > > -- > > > For information on using the Palm Developer Forums, or to unsubscribe, > > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > > -- > > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > -- > For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/
