The program will log on to a telnet server and an/or ftp server when I run it on a palm using a minstrel modem,that part is done...but when run the program on Pose I can't get POSE to recognize a connection, it always times out. I run an internet server and 2 Linux cluster servers, I deal with Telnet all the time so I am familiar (though not perfectly) with tcp/ip stuff. The program does log in ok when I run it on the palm directly, and I have done a tcpdump to see the comunication from the palm, but when I run it on the emulator it never gets to that point. thanx bill
----- Original Message ----- From: "Palm Dev Forum" <[EMAIL PROTECTED]> To: "Palm Developer Forum" <[EMAIL PROTECTED]> Sent: Friday, February 15, 2002 12:10 PM Subject: Re: Pose and netlib > Bill, > > That looks like a port number. Telnet defaults to 23, not 21. 25 is email > SMTP. 21 sounds familiar, but ... > > What is your app trying to do over the internet? Can you test it as an > intranet, so you can have the server at the same location as you. Maybe you > could trace on the server side to see what is or is not connecting. > > PS - I am assuming you are familiar with TCP/IP and that it requires an > address like 192.168.0.2 and a port, like 80. Both the sender and receiver > of a packet must have an address and port. Senders usually pick an > arbitrary port number, receivers almost always work on a specific port, like > 80 is for HTTP requests. > > If you are not familiar with this concept, stop programming and do some > TCP/IP reading. There are many tutorials posted on the web (FREE > Education). > > ------------------------------------------------------------------- > Gary Gorsline > Easy Business Software > ========================== End of Message ========================== > > ----- Original Message ----- > From: "bill" <[EMAIL PROTECTED]> > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > Sent: Friday, February 15, 2002 1:14 PM > Subject: Re: Pose and netlib > > > > > > I'm not using DNS, I am using the IP addresses. I can surf the web, but > > when I try to use my own program, one that I wrote to connect to a telnet > > session it doesn't work. I found this error: > > "(GDB) set confirm off(GDB) target pilot localhost:21localhost:21: Invalid > > argument." > > > > I don't know where it go localhost:21, I strictly use IP addresses, maybe > > this will give more clues, I hope. > > I am new to this, and as usual, I probably bit off more than I can chew > > right now, but usually I learn better that way, so bear with me and thanx > > for the help. > > thanx > > bill > > > > ----- Original Message ----- > > From: "Palm Dev Forum" <[EMAIL PROTECTED]> > > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > > Sent: Friday, February 15, 2002 9:37 AM > > Subject: Re: Pose and netlib > > > > > > > Hey Bill, > > > > > > I think SebNob is right. Since you don't seem to have a local web > server > > > you can access by IP, why not try this: > > > > > > on your desktop system which is on the same internet connection as POSE, > > go > > > to a dos prompt and type > > > > > > PING YAHOO.COM > > > > > > It will respond with 216.115.109.6 as the IP address of YAHOO.COM. (But > > do > > > this yourself anyway to make sure your connection is working right now > and > > > YAHOO.COM is working right now.) > > > > > > Surf on POSE to that IP instead of typing in the www.yahoo.com and see > > what > > > happens. > > > > > > ------------------------------------------------------------------- > > > Gary Gorsline > > > Easy Business Software > > > ========================== End of Message ========================== > > > > > > ----- Original Message ----- > > > From: "bill" <[EMAIL PROTECTED]> > > > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > > > Sent: Friday, February 15, 2002 12:02 PM > > > Subject: Re: Pose and netlib > > > > > > > > > > One thing I noticed about the new pose is that you can actually change > > the > > > > "localhost" to a IP address:port, I was wonder, probably a stupid > > > question, > > > > but what would the port number be?? I used my host computer IP > address > > > and > > > > the 6416 that they had in there, but it still won't work. > > > > thanx > > > > bill > > > > > > > > "SebNob" <[EMAIL PROTECTED]> wrote in message > > > > > > > > > > news:LYRIS-45725-70158-2002.02.15-07.26.59--wlalexander#[EMAIL PROTECTED] > > > > lmos.com... > > > > > Hi bill > > > > > > > > > > Maybe it's a problem related to the DNS. I think that POSE > doesn't > > > get > > > > > the DNS from the host computer. If you have a web server on your > LAN, > > > try > > > > > accessing it by it's IP. Personnally i connect my POSE with a win > RAS > > > and > > > > it > > > > > work fine. > > > > > > > > > > "bill" <[EMAIL PROTECTED]> a �crit dans le message news: > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > I am just redirecting netlib to the TCP/IP stack of the host > > computer > > > > like > > > > > I > > > > > > am supposed to. I have no prroblem with the program on the palm > it > > is > > > > > only > > > > > > when trying to use my cable connection, or even a modem > connection, > > I > > > > > always > > > > > > get a time out error, it never works. Pose does not seem to know > > how > > > to > > > > > get > > > > > > to the internet. > > > > > > thanx > > > > > > bill > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Palm Dev Forum" <[EMAIL PROTECTED]> > > > > > > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > > > > > > Sent: Thursday, February 14, 2002 7:19 PM > > > > > > Subject: Re: Pose and netlib > > > > > > > > > > > > > > > > > > > I'm sure someone, even me, might be able to give you some help, > > but > > > > you > > > > > > just > > > > > > > haven't told us enough about your problem. Yes, I've had > > Connection > > > > > Time > > > > > > > Outs with POSEr and Network connection to Internet. And it's > > worked > > > > > too. > > > > > > > We use CDPD modems, and when you are out of a service area or in > a > > > > steel > > > > > > > building, you get them, too. Sometimes your ISP goes down, > > servers > > > > even > > > > > > go > > > > > > > down. You have to program for them. But I assume that you have > > > some > > > > > > other > > > > > > > problem. Can you give us some details please. > > > > > > > > > -------------------------------------------------------------------- > > > > > > > Gary Gorsline > > > > > > > Easy Business Software > > > > > > > ========================== End of Message > > ========================== > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "bill" <[EMAIL PROTECTED]> > > > > > > > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > > > > > > > Sent: Thursday, February 14, 2002 5:31 PM > > > > > > > Subject: Pose and netlib > > > > > > > > > > > > > > > > > > > > > > Has anyone go the error Connection timed out when trying to > test > > > an > > > > > > > > aplication on pose that uses to tcp/ip of the host computer to > > get > > > > to > > > > > > the > > > > > > > > internet... And if you have, did you fix it and if so...how??? > > > > > > > > thanx, I am desperate. > > > > > > > > bill > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > For information on using the Palm Developer Forums, or to > > > > unsubscribe, > > > > > > > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > For information on using the Palm Developer Forums, or to > > > unsubscribe, > > > > > > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > For information on using the Palm Developer Forums, or to > unsubscribe, > > > > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > > > > > > > > -- > > > > For information on using the Palm Developer Forums, or to unsubscribe, > > > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > > > > > > > > > -- > > > For information on using the Palm Developer Forums, or to unsubscribe, > > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > > -- > > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/tech/support/forums/ > > > > > -- > For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/
