Unless you have some hardware you can only connect to the Palm I'd use Pose to debug.
----- Original Message ----- From: "Fritzsching Michelle" <[EMAIL PROTECTED]> To: "Palm Developer Forum" <[EMAIL PROTECTED]> Sent: Thursday, May 16, 2002 3:56 PM Subject: serial connection with m515 > Hi, > > I am new, so please don't laugh ... I haven't been able to debug to the > device. The emulator works great, but there seems to be a problem > connecting to the device. I have a Palm 515 and am trying to debug in > CodeWarrior 8. I was using a USB cradle to connect, but tech support at > CodeWarrior told me the USB standard changed with the m515 and it won't > host CodeWarrior's debugger connection. So now I've got a serial cable > instead. It's a knockoff brand, but I'm trying not to let that stop me. > > It HotSyncs with the serial cable ok, so the connection is working for > some things, but when trying to connect from within the debugger it > times out after about 4 seconds and gives me a Failed to Connect error > dialog (which is exactly what it did when trying with the USB). > > The Preferences are set to Com1 and I'm guessing on the speed but I've > tried them all. HotSync is disabled/must be started manually. The > machine has been rebooted. The Palm has been soft reset. The shortcut..2 > is being written correctly. > > Has anyone had any experience with this? Should this be so much trouble? > What's missing? > > Thanks in advance, > Michelle > > -- > For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
