<[EMAIL PROTECTED]> wrote in message news:108453@palm-dev-forum...
>
> --- In [EMAIL PROTECTED], Ben Combee <[EMAIL PROTECTED]>
> wrote:
> >
> > >Thanks for your reply.  I had concluded as much, but needed to hear
> > >it from someone else to be convinced!
> > >
> > >I would upgrade to CW9, except that I have heard from several folks
> > >that they've been unable to link the special SatForms startuplib
> with
> > >CW versions newer than 6.  Since a large part of my business is
> > >commercial SatForms extensions, and they are the only thing I use
> CW
> > >for, I've stayed with CW6.  So, I will just have to do without
> > >debugging to PalmSim I guess.
> >
> > I know that when I did a SatForms extension back in early 2001, I
> was able
> > to use CodeWarrior for Palm OS V7 successfully with the SatForms
> runtime
> > library.  The only areas of the runtime that would different going
> forward
> > from V6 are related to C++ and expanded mode, neither of which
> would be
> > wise to use within a SatForms extension.
> >
> > I have SatForms 4 around here somewhere, so I'll try to see if I
> can link
> > an extension with it and CW Palm OS V9 and get it to work from a
> > program.  I'll report back if I have any problems, or if its
> successful.
> >
> > --
> > Ben Combee <[EMAIL PROTECTED]>
> > CodeWarrior for Palm OS technical lead
> > Palm OS programming help @ www.palmoswerks.com
>
> Thanks Ben, looking forward to your report.  Just try to compile one
> of the sample extensions such as SqrRoot in the \Satellite
> Forms\Samples\Extensions folder.
>
> If you can get it to compile and link without any fuss, then I ought
> to go ahead with the CW9 upgrade.
>
> David Thacker


Well, I went ahead and bought the CW9 upgrade, and it does compile SatForms
extensions without any problems.  And it debugs to PalmSim, which is what I
wanted to do, so things are looking up.

David Thacker
http://www.palmdatapro.com


-- 
For information on using the Palm Developer Forums, or to unsubscribe, please see 
http://www.palmos.com/dev/support/forums/

Reply via email to