You mean a trace of the serial connection traffic? The Tungsten cable doesn't ever seam to raise, or even power any control lines, even when put in debug mode. The PC just sends out its 'pings' and doesn't get a response..
I have CCed this to [EMAIL PROTECTED] also. I am very willing to help with this issue.. Chris Percival Software Engineer DDI: +44 (0)1249 700072 www.interaxis.co.uk "Ben Combee" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > > At 03:52 AM 7/28/2003, Chris Percival wrote: > >Thanks for the reply Jeff, but I am still having problems. Actually another > >major problem I am having is its very reluctant to connect at all, it rarely > >detects the other end and starts downloading (the number of times its done > >it I can count on my fingers). I can hot-sync to the device without a > >problem. I can't identify what I need to do to make it work every time. > >This is very frustrating, as when it does connect, it doesn't download > >anyway! Argh! I am also currently developing on the Treo 270 via USB with > >no problems, and I have in the past developed on older Palm platforms with > >CW 6 and a serial cable with no problems. > > V9 tends to be a bit more picky about its connection, but it is doing this > to be more robust. Since I don't have any Tungsten W hardware here at > Metrowerks, I can't tell you what's happening, but if you contact MW > technical support, they can give you information needed to send us a debug > connection trace so we might be able to track down the connection issue. > > -- > Ben Combee <[EMAIL PROTECTED]> > CodeWarrior for Palm OS technical lead > Palm OS programming help @ www.palmoswerks.com > > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
