Hi, I tried this on my T3 as well and it has the same preformance characteristics, after doing a soft reset, the T3 is about 20-25% faster then it normaly would be. Turning the device off, either manuly or due to inactivity, results in the device becoming slower.
Anyone tried doing this on the Tungsten E? Cheers, Hans "Jonatan Fernstad" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > > I have noticed something strange and rather annoying with the Tungsten T3. > > The first time that you power off and then powers on the T3 after a reset, > the performance of the T3 is changed and everything runs slower than before > the power off/power on. > > Has anyone else seen this on their T3? > > It is perfectly reproducable ( atleast on mine ). > > To test this one can install a benchmark app ( such as Speedy 3.0 from > www.aldweb.com ), perform a reset, launch Speedy and run a benchmark test. > Then power off and power on the device and then run a second benchmark test. > > Speedy�s Calculation test is ~23 % slower, the Memory read/write test is ~29 > % slower and the Graph test is about 25 % slower with the second benchmark > test compared to the test being run before the power off / power on. > > Can someone find an explanation to why this is happening? > > I have verified that the Bus and CPU core clock settings remain the same > before and after, aswell as the SDRAM clock. > > Is it perhaps some power saving setting that is set at power off, is > forgotten about and hence is not reset at power on? > > Some new task is started and runs in the background after a power on? > > > TIA, > > Jonatan > > www.clievideo.com > > > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
