I did finally fix the problem. I found that there is a new Dynamic Input Area sample onthe PalmSource website. They have some changes to the sample. I used their changes, and tested it on a friends T3, and it no longer crashes. The link to that sample code is:
http://kb.palmsource.com/cgi-bin/palmsource.cfg/php/enduser/std_adp.php?p_faqid=507 I hope that this helps. Good luck, Jeremy "Jamie Macleod" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Jeremy, > > Did you find the solution? I'm having the same problem with no T3 of my own > to test it on. > > Jamie > "Jeremy" <[EMAIL PROTECTED]> wrote in message > news:[EMAIL PROTECTED] > > I have adapted my software to work on the T3 using the DIA API. It works > > fine, without any errors, on the Tungsten T3 simulator including portrait > > and landscape modes. > > > > When I install the program into a T3 without AppSlipRotate.prc and > > StatusBarLib.prc my program works fine. But of course the screen does not > > expand. > > > > However when I install my program on a T3 with both AppSlipRotate.prc and > > StatusBarLib.prc already installed (simultaneously, no crash on > > installation). When I start my program the T3 goes into a reset loop > which > > can only be broken by a hard reset. > > > > Has anyone else had this problem? I can't begin to figure out how to > > isolate the problem since I can't reproduce the problem on the simulator. > > > > I should say that I don't have my own T3. I had a generous friend test > the > > program - I can't keep crashing my friend's T3. > > > > Any help would be appreciated. > > > > Thank you, > > Jeremy > > > > > > > > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
