Weird, that's what I'm using. "Jeremy" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > I did finally fix the problem. I found that there is a new Dynamic Input > Area sample onthe PalmSource website. They have some changes to the sample. > I used their changes, and tested it on a friends T3, and it no longer > crashes. The link to that sample code is: > > http://kb.palmsource.com/cgi-bin/palmsource.cfg/php/enduser/std_adp.php?p_faqid=507 > > I hope that this helps. > > Good luck, > Jeremy > > > "Jamie Macleod" <[EMAIL PROTECTED]> wrote in message > news:[EMAIL PROTECTED] > > Jeremy, > > > > Did you find the solution? I'm having the same problem with no T3 of my > own > > to test it on. > > > > Jamie > > "Jeremy" <[EMAIL PROTECTED]> wrote in message > > news:[EMAIL PROTECTED] > > > I have adapted my software to work on the T3 using the DIA API. It > works > > > fine, without any errors, on the Tungsten T3 simulator including > portrait > > > and landscape modes. > > > > > > When I install the program into a T3 without AppSlipRotate.prc and > > > StatusBarLib.prc my program works fine. But of course the screen does > not > > > expand. > > > > > > However when I install my program on a T3 with both AppSlipRotate.prc > and > > > StatusBarLib.prc already installed (simultaneously, no crash on > > > installation). When I start my program the T3 goes into a reset loop > > which > > > can only be broken by a hard reset. > > > > > > Has anyone else had this problem? I can't begin to figure out how to > > > isolate the problem since I can't reproduce the problem on the > simulator. > > > > > > I should say that I don't have my own T3. I had a generous friend test > > the > > > program - I can't keep crashing my friend's T3. > > > > > > Any help would be appreciated. > > > > > > Thank you, > > > Jeremy > > > > > > > > > > > > > > > > > >
-- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
