Hi,
I'm new to the list but I have looked some in the online archives to find an answer but have not. The problem I have is that my code works just fine on the Palm Simulator on my PC but when I move the application to the T3 it behaves strange. I'm aware of the CTS/RTS bug and thats taken care of. I have also made some tests so I'm sure its not a hardware problem.
Tha application sends a small array of command bytes to a sensor that will start sending data back continously. On the PC with the simulator this works just fine. Though on the T3 I get just a small amount of data back and then it is like there is no more data available to read.
When I use a serial terminal program like Portabella on the T3 I can send the same array of command bytes and get a continous stream of data so its not any hardware problem.
Except for the CTS/RTS bug, are there any other known differences between the simulator and the real devices?
Portabella - http://www.palmgear.com/index.cfm?fuseaction=software.showsoftware&SID=6F908F1C-CF18-ADC1-A2DFB845F8B7A362&PartnerREF=&prodID=54404
Best Regards,
Karl-Petter
-- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
