Hi Annada,
I've tested the application and it runs successfully if I try to communicate
between ::
1)Two palm Simulators
2)between simulator running on windows mchine and another application
running on linux machine..
But when i try to run on the device..ie I'm only able to send the data from
the device but cannot receive the data.
I'm sending u a code which works fine on TReo 270 where I'm using a dial up
but not Tungsten C where i'm using wi-fi.
/********************************************/
bzero(&servAddrP,sizeof(servAddrP));
servAddrP.family = netSocketAddrINET;
servAddrP.port = NetHToNS(6060);//its a port where i try to bbind the
server
servAddrP.addr =NetHToNL (netIPAddrLocal);default IP
result = NetLibSocketBind(AppNetRefnum,servfd,(NetSocketAddrType
*)&servAddrP,
sizeof(servAddrP), AppNetTimeout,&err);
if(!result)
{
FrmAlert(BindAlert);//Success
result = 0;
result = NetLibSocketListen(AppNetRefnum , servfd, 1 , -1, &err);
if(result != 0)
{
FrmAlert(FailureAlert);//Failure
}
ClientLen = sizeof(clientAddrP);
result = 0;
clientfd = NetLibSocketAccept (AppNetRefnum, servfd,(NetSocketAddrType
*)&clientAddrP , &ClientLen , -1,&err);
if(err == 0)
{
FrmAlert(BindAlert);//Success
}
else
{
FrmAlert(FailureAlert);//Failure
}
NetLibSocketClose (AppNetRefnum,servfd, AppNetTimeout,&err);
}
Click on the image to chat with me Powered by IMaround Patent pending
presence and IM technology from Geodesic http://www.geodesiconline.com
----- Original Message -----
From: "Annada Prasana" <[EMAIL PROTECTED]>
To: "Palm Developer Forum" <[EMAIL PROTECTED]>
Sent: Friday, July 02, 2004 11:51 AM
Subject: RE: for Annada Prasana
> Hy,Gaurav Mengi
> Can you test it for simulator first?Bcoz for device may be some problem
of
> GPRS data communication.And in code first make the from address field to
> NULL,wheather it is working fine?
> Thankx
> Annada
>
> -----Original Message-----
> From: Gaurav Mengi [mailto:[EMAIL PROTECTED]
> Sent: Friday, July 02, 2004 11:43 AM
> To: Palm Developer Forum
> Subject: for Annada Prasana
>
>
> Hi Annada,
> I've seem ur previous postings about receving packets on
the
> device from the PC when u r using UDP packets..Even I'm facing the same
> problem n frequently making postings but no reply....can u plzz help me
with
> that if u know the solution...
>
> I'll highlight upon my issues:
> 1)On treo 270 if i use the Stream sockets I can communicate easily between
> the device and the PC....
> but if i use UDP ..I can only send data from the device to the PC but
cannot
> receive Data on the device.
>
> 2)On tungsten C ..i can never receive data from the PC to the device but
> can only send the data.
>
> I even tried with NOn-Blocking Sockets and even made the AppNetTimeout to
> forever..but nothing works.
>
>
>
> --
> For information on using the Palm Developer Forums, or to unsubscribe,
> please see http://www.palmos.com/dev/support/forums/
>
> --
> For information on using the Palm Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/support/forums/
>
>
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
