Hy Gaurav Mengi, AppNetTimeout? for NetLibSocketBind it should be -1. For UDP socket no need of NetLibSocketListen & NetLibSocketAccept. NetLibReceive is okey. Thankx Annada
-----Original Message----- From: Gaurav Mengi [mailto:[EMAIL PROTECTED] Sent: Friday, July 02, 2004 12:04 PM To: Palm Developer Forum Subject: Re: for Annada Prasana Hi Annada, I've tested the application and it runs successfully if I try to communicate between :: 1)Two palm Simulators 2)between simulator running on windows mchine and another application running on linux machine.. But when i try to run on the device..ie I'm only able to send the data from the device but cannot receive the data. I'm sending u a code which works fine on TReo 270 where I'm using a dial up but not Tungsten C where i'm using wi-fi. /********************************************/ bzero(&servAddrP,sizeof(servAddrP)); servAddrP.family = netSocketAddrINET; servAddrP.port = NetHToNS(6060);//its a port where i try to bbind the server servAddrP.addr =NetHToNL (netIPAddrLocal);default IP result = NetLibSocketBind(AppNetRefnum,servfd,(NetSocketAddrType *)&servAddrP, sizeof(servAddrP), AppNetTimeout,&err); if(!result) { FrmAlert(BindAlert);//Success result = 0; result = NetLibSocketListen(AppNetRefnum , servfd, 1 , -1, &err); if(result != 0) { FrmAlert(FailureAlert);//Failure } ClientLen = sizeof(clientAddrP); result = 0; clientfd = NetLibSocketAccept (AppNetRefnum, servfd,(NetSocketAddrType *)&clientAddrP , &ClientLen , -1,&err); if(err == 0) { FrmAlert(BindAlert);//Success } else { FrmAlert(FailureAlert);//Failure } NetLibSocketClose (AppNetRefnum,servfd, AppNetTimeout,&err); } Click on the image to chat with me Powered by IMaround Patent pending presence and IM technology from Geodesic http://www.geodesiconline.com ----- Original Message ----- From: "Annada Prasana" <[EMAIL PROTECTED]> To: "Palm Developer Forum" <[EMAIL PROTECTED]> Sent: Friday, July 02, 2004 11:51 AM Subject: RE: for Annada Prasana > Hy,Gaurav Mengi > Can you test it for simulator first?Bcoz for device may be some problem of > GPRS data communication.And in code first make the from address field to > NULL,wheather it is working fine? > Thankx > Annada > > -----Original Message----- > From: Gaurav Mengi [mailto:[EMAIL PROTECTED] > Sent: Friday, July 02, 2004 11:43 AM > To: Palm Developer Forum > Subject: for Annada Prasana > > > Hi Annada, > I've seem ur previous postings about receving packets on the > device from the PC when u r using UDP packets..Even I'm facing the same > problem n frequently making postings but no reply....can u plzz help me with > that if u know the solution... > > I'll highlight upon my issues: > 1)On treo 270 if i use the Stream sockets I can communicate easily between > the device and the PC.... > but if i use UDP ..I can only send data from the device to the PC but cannot > receive Data on the device. > > 2)On tungsten C ..i can never receive data from the PC to the device but > can only send the data. > > I even tried with NOn-Blocking Sockets and even made the AppNetTimeout to > forever..but nothing works. > > > > -- > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/support/forums/ > > -- > For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
