Hi Venkat,
I am have the same problem as yours. I have an RS232 app that works fine on
the m-series and the Tungsten T, but will not send on the Tungsten T3.
Seems there might be a problem with the T3. Have not tried a T2.
"raja_venkat"
<[EMAIL PROTECTED]> To: "Palm Developer Forum"
<[EMAIL PROTECTED]>
Sent by: cc:
[EMAIL PROTECTED] Subject: Tungsten T3 Serial port
problem
.palmos.com
07/18/2004 08:30 PM
Please respond to "Palm
Developer Forum"
Hi,
Iam using Tungsten T3 PDA.
My application is using Serial port .
My Target device is using only Tx & Rx signals .
But Tungsten T3 serial port is always checking for CTS handshaking
signal .
so it is unable to send the data through the Serial port.
But it is able to receive the data.
I tried with different flag settings by using the SrmCtrl( ) API.
When i shorted RTS & CTS signals then it is working.
Is there any other APIs which will control the CTS handshaking
signal ?
Is there any specific way to follow ?
Same application is working well with Tungsten T2 .
Your suggestions are always welcome.
Thanks & Regards
Venkat
--
For information on using the Palm Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/support/forums/
Although this e-mail and any attachments are believed to be free of any virus or other
defect which might affect any computer system, it is the responsibility of the
recipient to check that it is virus-free and the sender accepts no responsibility or
liability for any loss, injury, damage, cost or expense arising in any way from
receipt or use thereof by the recipient.
The information contained in this electronic mail message is confidential information
and intended only for the use of the individual or entity named above, and may be
privileged. If the reader of this message is not the intended recipient, you are
hereby notified that any dissemination, distribution or copying of this communication
is strictly prohibited. If you have received this transmission in error, please
contact the sender immediately, delete this material from your computer and destroy
all related paper media. Please note that the documents transmitted are not intended
to be binding until a hard copy has been manually signed by all parties.
Thank you.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
