Ben Combee a �crit : > At 03:26 PM 4/22/2005, you wrote: > >Ben Combee wrote: > > > > > > At 01:26 PM 4/22/2005, you wrote: > > > > there seems to be a contradiction in what you're writing. > > > > But in any case, I successfully added to the target the .r file > > > > that calls the .bin file, but CW 9.3 doesn't add the .bin file > > > > itself. I'm using the very .r and .bin files supplied in the > > > > 4.2 SDK samples, unaltered, and I do see them added to the > > > > sample project, but not to mine. Any special setting required > > > > to get CW to do this automatically? > > > > > Look at the .r file. Does it have the appropriate command to read > > > in the .bin file and assign it to a resource? If not, you'll need > > > to do that yourself -- search through palmoswerks.com for an > > > example. > > > >The .r file contains a single line: > > > >READ 'ARMC' (1) "ARMC0001.bin"; > > > >It's in my sole source directory, along with the ARMC0001.bin file. > > That should work. That should pull in that file, saving it as 'ARMC' #1, > which will then get put into your PRC file by PalmRez. If that doesn't > work, I don't have any more ideas.
In the end, it works, although the .bin file doesn't appear in the project window, unlike with the PalmOne sample. I compared every project setting, to no avail. -- Luc Le Blanc -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
