Re: Remote Debugging on Tungsten E2

[cbruner]

Yes I 've done it on a Tungsten D (which I assume is pretty close). It only takes one dot, so you write lower case L, dot, 2, and it's in debug mode. At this point it will appear locked up to the outside world, and can only be reset or talked to via the USB or com port.   Chris Bruner Compulife Software Inc. ============================================== ----- Original Message ----- From: Sebastian Massacane To: Palm Developer Forum Sent: Friday, November 04, 2005 5:44 PM Subject: Remote Debugging on Tungsten E2 Hi,   I'm trying to remote debug on a Tungsten E2, using CW 9.3. I did remote debug previously on other devices, but now I cannot connect to the E2: when trying to debug CW says "place the device in console mode ....".   I tried DotDotTwo and apparently the device is in console mode (cannot hotsync because the port is taken), although I cannot see a blinking dot on screen...   Has anybody tried remote debug on E2?   Thanks!   Sebastian   BTW: I could not set up console mode by using the down button...the E2 never restarted after the reset, so I had to re-reset... -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/