On 10/8/08, Bob Dennison <[EMAIL PROTECTED]> wrote: > I have finally finished the Canon Mark Twain Disneyland Riverboat. Attached > are some pictures. > > The boat is 19inches from bow to paddlewheel when finished. The parts come on > 31 pages printed out and the Instructions are 12 pages when printed. > > This is a very complicated model and not for the faint of heart to build. The > instruction are both written and with pictures but both leave you scratching > your head at times. Especially on building the hull and main deck. The > instructions just say "glue #1 to #2. The picture does not show any detail > about doing this. > > MANY of the parts are very small and take some time to cut out, fold, hold > and glue. > > The key to anyone who wants to built this model, take EXTRA time to make sure > you have the hull and main deck fitted properly and LEVEL across. All the > stairways fitting into the 2nd, and 3rd decks depends on all being EXACTLY > level. If the main deck is off, they all are off. > > Much of the interior parts of the decks are not visable on the finished model > unless you get in there with a flashlight and tip the model around different > ways. You will know they aren't there but most everyone who looks at it will > not. > > IT IS a beautiful model when finished though and if you like building > intericate fulley detailed models, then go for it but set aside at least a 40 > to 50 hour building time. > > Bob D...
Bob, Very nicely done, sir, but "Canon?" Isn't this from Trader Sam and Disney Experience? -- Mike Hungerford http://users.sdccu.net/chthulhu2/models.html Eschew catachresis! --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/Papermodels?hl=en -~----------~----~----~----~------~----~------~--~---
