Yes, Mike you are correct. It is my blunder. Here is the link to all who are interested. http://www.disneyexperience.com/models/index.php Bob D...
--- On Wed, 10/8/08, Mike Hungerford <[EMAIL PROTECTED]> wrote: From: Mike Hungerford <[EMAIL PROTECTED]> Subject: [Papermodels II 31948] Re: Mark Twain Riverboat build. To: [email protected] Date: Wednesday, October 8, 2008, 3:12 PM On 10/8/08, Bob Dennison <[EMAIL PROTECTED]> wrote: > I have finally finished the Canon Mark Twain Disneyland Riverboat. Attached are some pictures. > > The boat is 19inches from bow to paddlewheel when finished. The parts come on 31 pages printed out and the Instructions are 12 pages when printed. > > This is a very complicated model and not for the faint of heart to build. The instruction are both written and with pictures but both leave you scratching your head at times. Especially on building the hull and main deck. The instructions just say "glue #1 to #2. The picture does not show any detail about doing this. > > MANY of the parts are very small and take some time to cut out, fold, hold and glue. > > The key to anyone who wants to built this model, take EXTRA time to make sure you have the hull and main deck fitted properly and LEVEL across. All the stairways fitting into the 2nd, and 3rd decks depends on all being EXACTLY level. If the main deck is off, they all are off. > > Much of the interior parts of the decks are not visable on the finished model unless you get in there with a flashlight and tip the model around different ways. You will know they aren't there but most everyone who looks at it will not. > > IT IS a beautiful model when finished though and if you like building intericate fulley detailed models, then go for it but set aside at least a 40 to 50 hour building time. > > Bob D... Bob, Very nicely done, sir, but "Canon?" Isn't this from Trader Sam and Disney Experience? -- Mike Hungerford http://users.sdccu.net/chthulhu2/models.html Eschew catachresis! --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/Papermodels?hl=en -~----------~----~----~----~------~----~------~--~---
