Where did you get the kit I am very interested in getting one. Thanks Adam Spivey
On Oct 1, 9:20 am, "James Hairston" <[email protected]> wrote: > One way to get rid of the splices is to print and cut two copies of the > formers then glue (laminate) to heavy card stock with the breaks in a > different location. > > That's the way plywood is constructed. Then cut the heavy card stock. This > method requires cutting the frame twice - once to cut the printed copy and > then the laminated final version. > > James J. Hairston > > 8559 Birch Creek Rd. > > Keller Tx. 76248 > > H: (817) 337-4183; E-Mail: <mailto:[email protected]> > [email protected] > > <mailto:[email protected]> > > <mailto:[email protected]> > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > > Behalf Of [email protected] > Sent: Thursday, October 01, 2009 8:53 AM > To: [email protected] > Subject: [Papermodels II 40246] UPDATE 7 1-32 Type VII U-Boat Build > > Finally some more movement on the U-Boat... > > Saddle Tanks 2 > > _____ > > Trimmed out and glued up the Right Hand saddle tank pieces. > > Each tank is made up of 19 pieces. Putting them together they are a little > fiddly, but in the end glue up nice and strong. > I tacked the formers together with a small drop of CA glue, followed by > Elmer's PVA. This works well when the pieces fit a little loose. Mine did > because I cut the cross openings a little wider than they should have been. > > The long, horizontal formers are two-pieces each, held together with slats. > > Thanks for lookin'! > > JoeG- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/papermodels?hl=en -~----------~----~----~----~------~----~------~--~---
