A word of warning to all who spray their models with clear to preserve them...DO NOT use card that you have already printed on one side. My nice Panzerfaust was made with 9 sheets that had been used on one side and the Panzerfaust merely printed on the second side. This was because I had run out of system board and was too majorly slack to engage my carcass in the 4 klm trip to town in order purchase more of the aforesaid item and so I used some previously printed on cardstock. All well and good until such time as I decided, for the good of posterity of course, to coat my pride and joy with flat clear acrylic. It was at this point that I discovered to my chagrin that the clear coat gives the cardstock a somewhat see-through propensity and now Uhu's Robby the Robot parts are available for viewing to all the world through the sides of my Panzerfaust. We live and learn.
Bones -- One pill makes you larger And one pill makes you small And the the ones that Mother gives you Don't do anything at all Go ask Alice..when she's ten feet tall -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
