Just think of it as extremely puzzling camo. (^_^) Thanks for the heads up.
On Jul 16, 1:49 am, Bones <[email protected]> wrote: > A word of warning to all who spray their models with clear to preserve > them...DO NOT use card that you have already printed on one side. My > nice Panzerfaust was made with 9 sheets that had been used on one side > and the Panzerfaust merely printed on the second side. > This was because I had run out of system board and was too majorly > slack to engage my carcass in the 4 klm trip to town in order purchase > more of the aforesaid item and so I used some previously printed on > cardstock. > All well and good until such time as I decided, for the good of > posterity of course, to coat my pride and joy with flat clear acrylic. > It was at this point that I discovered to my chagrin that the clear coat > gives the cardstock a somewhat see-through propensity and now Uhu's > Robby the Robot parts are available for viewing to all the world through > the sides of my Panzerfaust. > We live and learn. > > Bones -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
