It doesn't happen all the time, but sometimes there is enough of a margin at the top or bottom of the page to allow you to print it on 8 1/2 x 11 sheets of paper. For example, the images start printing a half inch from the top of the paper and stop printing two inches from the bottom. Based on that example it will print on a 8 1/2 x 11 sheet with no problems.
Another alternative is to spring for 8 1/2 x 14 legal size paper and print it that way. And use the extra paper for reenforcing the joints, scratch paper, or bookmarks. One problem in choosing the print to fit paper option is that the printer may scale the image to best fit the paper, but when you try to join parts from two (or more) sheets they don't fit. If you reduce the image to to fit the paper use the percentage It's been a while since I've played with Pepakura. Can you spin an image around so you can print the footer (bottom edge) first, like a PDF image? Just my .02 Duane ________________________________ From: Paul Smigel <[email protected]> To: "Papermodels@googlegroups" <[email protected]> Sent: Tuesday, December 11, 2012 5:07 PM Subject: [Papermodels II 47626] paper size conversion I opened the download of Scrat from IceAge It was created for A4 paper and Pepakura viewer offered to convert the size when I went to the print page as it recognized my printer and paper size. Before I convert this and print 32 pages how well does Pepakura do on conversions like this as far as having all the parts fit correctly after it has converted it for US letter.. All my model paper stock is in US letter 8.5 x 11 size Thanks Paul -- --
