Can't wait to see the finished product Bob. I had a look around for some info on the tail skid...it appears to be mounted on the rudder axis and may be steerable but I can't tell for sure.
Bones On Wednesday, September 17, 2014 2:29:51 PM UTC+10, [email protected] wrote: > > Hi Folks, > > The Tri plane has a rigging wire that passes *through *the wing at an > angle. > > By applying tape to the center wing leading edge I was able to reference > mark the angle for the upper and lower access holes. > > Sending a straight wire through that center wing would be a bear with > the top wing attached. > > Checking Internet references it appears that the tail skid moves with > the rudder for directional ground control. Agree? > > Other wires loosely attached may be seen in this photo. > > > > > Bob Penikas > -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
