I think many people like the idea of a CISS, but are afraid it's difficult to set up and that things can easily go wrong and create a disaster... So I think they'll love a good review! I hope you can get it to work well!
Thank you for your input! On Tuesday, March 8, 2016 at 2:18:45 PM UTC+1, cgutzmer wrote: > I have an artisan 1430 in the works with a CISS. For anyone that prints even > more than a few kits CISS is the way to go. Just need to remember to not let > it sit idle for too long. I will do a little review after I get it. Until now > I used a couple varieties of Canon printers which have been mixed results. > Chris > > > On Mon, Mar 7, 2016 at 11:49 AM, ninjatoes <[email protected]> wrote: > I think nowadays, for people who print a lot of images (like papercrafters > ;o) ink cost is a big issue when looking for a new printer. A CISS may be the > cheapest option. Thank you for your feedback! > > > > > > On Sunday, March 6, 2016 at 1:00:39 PM UTC+1, DougT wrote: > > > Canon MG5220 all-in-one that I have installed a CISS. > > > > > > It uses 5 inks: Black, Magenta, Cyan, Pigment Black, Yellow. > > > > > > The scanner bed can accomodate up to USLtr and A4. > > > > > > Two paper paths. One from a front tray that goes through the printer in a > > U-shaped path and a rear paper feeder that sends the paper through in an > > L-shaped path. > > > > > > I have used 64lb cover/176gsm and 110lb index/199gsm card stock with no > > problems using the rear feeder. The 176gsm can be fed using the front > > tray. Some 140lb index/252gsm has been sent through the rear feeder with > > no problems, but not very often. > > > > -- > > You received this message because you are subscribed to the Google Groups > "Papermodels II" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > http://www.ecardmodels.com -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
