git checkout v3.10.1 will put you right on the tag. On Tue, May 24, 2011 at 2:38 PM, Michael Jackson < mike.jack...@bluequartz.net> wrote:
> I don't usually run them as 'sudo' either but I am grasping at anything at > this point. This almost seems like the main ParaView program isn't loading a > library/plugin that contains the menu bar setup code. Is that code in fact > in a library or plugin? Maybe that library/plugin isn't getting properly > setup during the fixup_bundle stage? Maybe I have a missmash of code in my > ParaView source directory? What is the git tag for ParaView 3.10.1? Maybe I > am not pulling correctly? Getting ready for another build with a completely > clean 3.10.1 download from Kitware. > -- > Mike Jackson <www.bluequartz.net> > > > On May 24, 2011, at 1:42 PM, David Partyka wrote: > > > The only other thing I can think of is that I don't run any of those > commands as sudo to create the binary. If you mix/match > priviledge/non-priviliedged execution, something will likely have a > permission problem and fail. To generate the binary this is my bash history > verbatim. > > > > 540 mkdir build-mike > > 541 cd source/ > > 542 git pull > > 543 git submodule update > > 544 cd .. > > 545 cd build-mike/ > > 546* cmake -DBUILD_SHARED_LIBS:BOOL=ON > -DCMAKE_BUILD_TYPE:STRING=Release > -DCMAKE_INSTALL_PREFIX=/Users/Shared/Toolkits/ParaView-3.10.1 > -DCMAKE_OSX_ARCHITECTURES:STRING="x86_64" > -DCMAKE_OSX_DEPLOYMENT_TARGET:STRING="10.5" > -DCMAKE_OSX_SYSROOT:PATH="/Developer/SDKs/MacOSX10.5.sdk" ../source/ > > <launched cmake-gui to set qmake location> > > 547 make -j18 > > 548 cpack -G DragNDrop --config > Applications/ParaView/CPackParaViewConfig.cmake > > > > > > On Tue, May 24, 2011 at 8:31 AM, Michael Jackson < > mike.jack...@bluequartz.net> wrote: > > Hmm. I am not seeing anything in there that is different from my setup > > besides the Qt version. I have tried both 4.6.3 and 4.7.2 of Qt and > > CMake versions 2.8.3 and 2.8.4. All with the same issue. Maybe asking > > on the Qt interest list if anyone has ever seen this type of behavior > > before? > > _________________________________________________________ > > Mike Jackson mike.jack...@bluequartz.net > > > > > > On Tue, May 24, 2011 at 8:14 AM, David Partyka > > <david.part...@kitware.com> wrote: > > > Qt 4.6.3 built by hand with cocoa, the binary is x64 only targeting > 10.5. I > > > am building from the tip of the 'release' branch. > > > Qt Configure command: > > > export QMAKE_MACOSX_DEPLOYMENT_TARGET=10.5 > > > ./configure > > > --prefix=/Users/partyd/Dashboards/Support/qt-4.6.3-MacOSX10.5/bin > -nomake > > > demos -nomake examples -arch x86_64 -opensource -release -cocoa -shared > > > > > > I also pass these in as -D arguments on initial configure with cmake. > > > set(CMAKE_OSX_ARCHITECTURES "x86_64" CACHE STRING "force build for > 64-bit > > > Leopard" FORCE) > > > set(CMAKE_OSX_DEPLOYMENT_TARGET "10.5" CACHE STRING "force build for > 64-bit > > > Leopard" FORCE) > > > set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.5.sdk" CACHE PATH > "force > > > build for 64-bit Leopard" FORCE) > > > On Mon, May 23, 2011 at 10:30 PM, Michael Jackson > > > <mike.jack...@bluequartz.net> wrote: > > >> > > >> Dave, > > >> What is the configuration you are using? Qt Version? As Carbon or > Cocoa? > > >> Universal Binaries or x64 only? Self build or download from Nokia? > > >> > > >> What tag from paraview git repository are you using? I may be able to > get > > >> my environment going like yours. > > >> > > >> I also tried the latest ParaView master from head and my plugins need > to > > >> be updated for that to work so using that is out of the question at > this > > >> point. > > >> > > >> This is what I have tried and have not worked: > > >> Qt 4.6.2 Self built with NO custom plugins > > >> Qt 4.7.2 Self built with NO custom plugins > > >> "make install" of both of the above. > > >> using sudo for everything to avoid possible permissions issues. > > >> > > >> I'll download the prebuilt Qt libraries from Nokia and try those. I > guess > > >> I could also try CMake 2.8.4 > > >> ___________________________________________________________ > > >> Mike Jackson www.bluequartz.net > > >> Principal Software Engineer mike.jack...@bluequartz.net > > >> BlueQuartz Software Dayton, Ohio > > >> > > >> > > >> > > >> On May 23, 2011, at 6:33 PM, David Partyka wrote: > > >> > > >> > Can you provide the initial cmake configuration details of your > vanila > > >> > paraview build? > > >> > > > >> > On Mon, May 23, 2011 at 6:02 PM, Michael Jackson > > >> > <mike.jack...@bluequartz.net> wrote: > > >> > I tried this also: > > >> > > > >> > 562:[mjackson@ferb2:4.6.2]$ sudo rm -rf _CPack_Packages/; sudo > cpack -G > > >> > ZIP --config Applications/ParaView/CPackParaViewConfig.cmake > > >> > CPack: Create package using ZIP > > >> > CPack: Install projects > > >> > CPack: - Run preinstall target for: ParaView Runtime Libs > > >> > CPack: - Install project: ParaView Runtime Libs > > >> > CPack: - Run preinstall target for: HDF5 Core Library > > >> > CPack: - Install project: HDF5 Core Library > > >> > CPack: - Run preinstall target for: VTK Runtime Libs > > >> > CPack: - Install project: VTK Runtime Libs > > >> > CPack: - Run preinstall target for: ParaView Components > > >> > CPack: - Install project: ParaView Components > > >> > CPack: Create package > > >> > CPack Error: Problem while adding file< > > >> > /Users/Shared/OpenSource/ParaView-3.10.1/4.6.2 > /_CPack_Packages/Darwin-i386/ZIP/ParaView-3.10.1-Darwin-i386/lib/paraview-3.10/libCosmo.dylib> > > >> > to archive > > >> > </Users/Shared/OpenSource/ParaView-3.10.1/4.6.2 > /_CPack_Packages/Darwin-i386/ZIP/ParaView-3.10.1-Darwin-i386.zip> > > >> > .ERROR =archive_write_header: Filetype not supported > > >> > CPack Error: Problem compressing the directory > > >> > CPack Error: Error when generating package: ParaView > > >> > > > >> > > > >> > And that was built against Qt 4.6.2. > > >> > ___________________________________________________________ > > >> > Mike Jackson www.bluequartz.net > > >> > Principal Software Engineer mike.jack...@bluequartz.net > > >> > BlueQuartz Software Dayton, Ohio > > >> > > > >> > On May 23, 2011, at 5:56 PM, David Partyka wrote: > > >> > > > >> > > I am really unsure, I haven't ever seen these kinds of errors > before > > >> > > and I am unable to reproduce this. sla.r on my system appears to > just > > >> > > contain license information. Have you tried manually removeing the > > >> > > _CPack_Packages directory in your build tree to see if for some > reason cpack > > >> > > isn't able to blow it away entirely? > > >> > > > > >> > > On Mon, May 23, 2011 at 5:24 PM, Michael Jackson > > >> > > <mike.jack...@bluequartz.net> wrote: > > >> > > When running CPack on a "clean" paraview build directory where > NONE of > > >> > > my plugins are being build I get the following after trying to run > CPack: > > >> > > > > >> > > cpack -G DragNDrop --config > > >> > > Applications/ParaView/CPackParaViewConfig.cmake > > >> > > ..... > > >> > > > > >> > > > > >> > > > /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r:522: > > >> > > ### /usr/bin/Rez - String spans lines. > > >> > > > > >> > > > /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r: > > >> > > ### /usr/bin/Rez - Since errors occurred, > > >> > > > /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/temp-udco.dmg's > > >> > > resource fork was not completely updated. > > >> > > > > >> > > > /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r: > > >> > > ### /usr/bin/Rez - SysError -37 during set file info. > > >> > > > > >> > > CPack Error: Problem compressing the directory > > >> > > CPack Error: Error when generating package: ParaView > > >> > > > > >> > > > > >> > > > > >> > > ___________________________________________________________ > > >> > > Mike Jackson www.bluequartz.net > > >> > > Principal Software Engineer mike.jack...@bluequartz.net > > >> > > BlueQuartz Software Dayton, Ohio > > >> > > > > >> > > On May 23, 2011, at 4:32 PM, David Partyka wrote: > > >> > > > > >> > > > I've never seen anything like that, as that is the same process > I > > >> > > > used to make the 3.10.1 binaries. Though I did use cmake 2.8.4. > Are you > > >> > > > using a really new Qt or something along those lines? > > >> > > > > > >> > > > On Mon, May 23, 2011 at 4:19 PM, Michael Jackson > > >> > > > <mike.jack...@bluequartz.net> wrote: > > >> > > > I followed the directions on the wiki page to compile my own > > >> > > > ParaView 3.10.1 because I have some custom plugins that I > compile. The .dmg > > >> > > > image was created just fine but the contained "ParaView.app" > when launched > > >> > > > only has a menu bar that has "New Application" menu. Nothing > else. Yet when > > >> > > > I run it from the Build folder everything works just fine. Is > there > > >> > > > something in the cmake configuration of ParaView that I need to > set that > > >> > > > tells CMake that I am going to making a redistributable package? > The same > > >> > > > thing happens if I try a "make install" from the command line. > This is on OS > > >> > > > X 10.6.8 with CMake 2.8.3 and the ParaView 3.10.1 sources from > the web site. > > >> > > > ___________________________________________________________ > > >> > > > Mike Jackson www.bluequartz.net > > >> > > > Principal Software Engineer mike.jack...@bluequartz.net > > >> > > > BlueQuartz Software Dayton, Ohio > > >> > > > > > >> > > > _______________________________________________ > > >> > > > Powered by www.kitware.com > > >> > > > > > >> > > > Visit other Kitware open-source projects at > > >> > > > http://www.kitware.com/opensource/opensource.html > > >> > > > > > >> > > > Please keep messages on-topic and check the ParaView Wiki at: > > >> > > > http://paraview.org/Wiki/ParaView > > >> > > > > > >> > > > Follow this link to subscribe/unsubscribe: > > >> > > > http://www.paraview.org/mailman/listinfo/paraview > > >> > > > > > >> > > > > >> > > > > >> > > > >> > > > >> > > > > > > > > _______________________________________________ > > Powered by www.kitware.com > > > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > > > Follow this link to subscribe/unsubscribe: > > http://www.paraview.org/mailman/listinfo/paraview > > > >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview