Lester, What are the dimensions of the grid in the table? Are they 116x51x51 or 115x50x50?
The extent that you set in the TableToStructuredGrid filter uses inclusive indices. That means they should go from 0 to one less than the size of the dimension. So if your grid is 115x50x50, then the extent should be set as X = 0 - 114 Y = 0 - 49 Z = 0 - 49 -Ken -----Original Message----- From: ParaView [mailto:[email protected]] On Behalf Of Lester Anderson Sent: Tuesday, June 21, 2016 9:03 AM To: [email protected] Subject: [EXTERNAL] [Paraview] Table to structured grid problem Hello, I have tried to generate a structured grid from a csv file comprising 51 layers with X and Y as Long and Lat respectively. (1) Load CSV file (2) Filter -> TableToStructuredGrid set dimensions: x = 0 - 115 y = 0 - 50 z = 0 - 50 This all works fine, but the plot is skewed oddly in the gridding, as in the outline view does not show a nice regular shaped outline but rather a jagged edge, almost like it is trying to join points on the front and back faces (see test picture). TableTo Points worked fine and all points were placed correctly. Paraview 5.0.0 64-bit Windows Any ideas what might be going on? I never had this problem before and the CSV file is fine. Thanks Lester _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
