Hi Ken, The data dimensions are: 116 x 51 x 51 (xyz), so the model extent was set to: X = 0 - 115, Y = 0 - 50, Z = 0 -50 These extents work fine and no errors assciated with the input, and no missing nodes. The model comprises 51 layers and each is 116 x 51 and all have the total 5916.
Not sure what is going on because loading as points is fine. On 21 June 2016 at 17:30, Moreland, Kenneth <[email protected]> wrote: > Lester, > > What are the dimensions of the grid in the table? Are they 116x51x51 or > 115x50x50? > > The extent that you set in the TableToStructuredGrid filter uses inclusive > indices. That means they should go from 0 to one less than the size of the > dimension. So if your grid is 115x50x50, then the extent should be set as > X = 0 - 114 > Y = 0 - 49 > Z = 0 - 49 > > -Ken > > -----Original Message----- > From: ParaView [mailto:[email protected]] On Behalf Of Lester > Anderson > Sent: Tuesday, June 21, 2016 9:03 AM > To: [email protected] > Subject: [EXTERNAL] [Paraview] Table to structured grid problem > > Hello, > > I have tried to generate a structured grid from a csv file comprising > 51 layers with X and Y as Long and Lat respectively. > > (1) Load CSV file > (2) Filter -> TableToStructuredGrid > set dimensions: > x = 0 - 115 > y = 0 - 50 > z = 0 - 50 > > This all works fine, but the plot is skewed oddly in the gridding, as in the > outline view does not show a nice regular shaped outline but rather a jagged > edge, almost like it is trying to join points on the front and back faces > (see test picture). > > TableTo Points worked fine and all points were placed correctly. > > Paraview 5.0.0 64-bit Windows > > Any ideas what might be going on? I never had this problem before and the CSV > file is fine. > > Thanks > Lester _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
