Hi Jim, On the bottom of the case there should be a small round hole located approximately in the middle of the bottom cover.
My Veronica is a couple years old so the case design may have changed somewhat. Anyway, you should be able to access the frequency control with a small screwdriver through this hole. The actual control is an inch or so behind the hole,so you have to feel around a bit with the end of the screwdriver to find the slot. Also, it's best to use a plastic screwdriver if you can because the frequency can tend to shift a bit as you approach the control with the screwdriver. This miakes it a bit tricky to set the frequency, but once set, it should be pretty stable. It's clearly designed only to have the frequency set very occasionally. The first time you go exploring through this small hole, you may want to do it with the transmitter turned off if you're worried about accidently sorting something out although I've done it several times with the power on and haven't had a problem. Don On Wed, 17 Nov 2004 15:22:41 -0000, Jim O'Sullivan wrote: Hi I have recently purchased a Veronica 50mw FM transmitter enclosed in a case. I am trying to work out how to change its transmission frequency. Help welcomed! Jim _______________________________________________ PC-Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] _______________________________________________ PC-Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
