Hi Marty, This might be a long message, because many things might have happened to cause this problem. I'm remembering why I switched from standard to Pro now as it's easier to schedule stream recording with Pro, but still ...
Ok, let's see. If you were at your computer, and total recorder popped up and you closed it during the time it was to record, it is possible you inadvertently cancelled the recording by mistake when you closed the program. The program does not, I think, automatically default to running in your system tray when it is closed. Or, it is possible the wrong recording source was selected, and that is why there was no signal to be recorded. When you scheduled your recording, what did you have set under the Recording Source & Parameters dialogs, record from Software or from the soundboard? Usually, if you are recording a stream, the Software choice works quite well. The soundboard option lets you select various sound sources such as a secondary soundcard, if you have one, and various input sources from your soundcard such as the Line in, microphone, etc. I'd open Total recorder, and then open the scheduler and double check what is selected under Recording Source and Parameters, and try using the Software option before playing around with Soundboard, and all it's many choices. Try playing with it a bit, and making some test recordings to get really comfortable with the program before your next scheduled recording is to take place. . Total recorder can take a bit of getting used to, and I missed a couple of scheduled programs before I finally got mine completely straightened out. Feel free to write to me off list if you need any help. ~Ann ----- Original Message ----- From: "Marty Rimpau" <[EMAIL PROTECTED]> To: "pc-audio list" <[email protected]> Sent: Saturday, October 29, 2005 4:34 PM Subject: tried to record with total recorder scheduler > Hi all, I tried to record with total recorder scheduler, and I > understood from this list that you had to have the stream going before > the recording could be made, well, I scheduled the time, and had the > stream going, but no file got recorded, instead, it said no signal, and > I don't know why it did that, seeing that kerio personal firewall > didn't come up and warn me about a connection, so, what might have I > done wrong? I did close total recorder, because I didn't know if it > had to be running, because ftp voyager doesn't need to be running for > its' scheduler to work, so I had total recorder scheduler start in ms > config, but when I checked what I thought was a file, there was none, > and, in the scheduler, it gave the name and location of the file, but > said, no signal, so what went wrong, because it was acting the way > total recorder usually does when winamp is started before a stream, by > not recording, yet, with standard edition, I was told I had to have the > stream up before total recorder could record the stream, and the radio > button was set to record the file, so is the trick to leave total > recorder running until the event is over, or will the scheduler take > care of things, because, total recorder did come up during the > scheduled time, but it was as if, the scheduler totally ignored the > part about recording the file I wanted. This with total recorder > version 5.3, window-eyes 5.5 beta2, windows 98 se, 192 megs of ram, and > a 400 megs processor. > > Marty > > > > _______________________________________________ > PC-Audio List Help, Guidelines, Archives and more... > http://www.pc-audio.org > > To unsubscribe from this list, send a blank email to: > [EMAIL PROTECTED] > > This list is a service of MosenExplosion.com. To see what other lists we > offer, visit us on the web at http://www.MosenExplosion.com > > _______________________________________________ PC-Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] This list is a service of MosenExplosion.com. To see what other lists we offer, visit us on the web at http://www.MosenExplosion.com
