Can someone highlite the differences between the latest versions of Total Recorder and Replay AV Please? Beginning to look as if they both do very similar things.
Cheers, >From Ray I can be contacted off-list at: mailto:[EMAIL PROTECTED] -----Original Message----- Larry Higgins Subject: RE: using Total Recorder 7 with software speech Just curious. Can you record without hearing your screen reader with Replay AV? At 02:11 PM 4/23/2008, you wrote: >In fact, I don't think there's much we can do about it, but I can always >hope that somebody can find a loophole. Here is my response received from >High Criteria support: > >Hello Dean Martineau, > >Under Windows Vista with Total Recorder an output of another software >(including Internet transmission) can be recorded in three ways: > >The first one is in SoundBoard mode from a loop-back line. Regretfully >in this case you cannot avoid recording your screen-reader. > >The second way is in Software mode using the Total Recorder user-mode >audio driver (for more information on using Total Recorder drivers >please refer to the following link >http://www.totalrecorder.com/tr_drivers.htm). Using this method you can >set Total Recorder to record an output only of a certain application. >Regretfully this method will not work with the majority of playback >program. > >The third way is in Software mode using the Total Recorder kernel-mode >audio driver. For Total Recorder not to record a screen-reader in this >case you can try one of the following: > >1) set a screen-reader to use directly your soundcard driver (not Total >Recorder driver); >2) do not set the Total Recorder driver as a system default device, but >set a playback program an output of which you need to record to use the >Total Recorder kernel-mode driver. > >Regards, >High Criteria Support Team. > > > > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >On Behalf Of Sunshine >Sent: Wednesday, April 23, 2008 11:34 AM >To: PC Audio Discussion List >Subject: Re: using Total Recorder 7 with software speech > >i would like to know this as well, since all i get is the software speech in > >my recordings? >----- Original Message ----- >From: "Dean Martineau" <[EMAIL PROTECTED]> >To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org> >Sent: Wednesday, April 23, 2008 11:12 AM >Subject: using Total Recorder 7 with software speech > > > > It seems that, while Total Recorder 7 does allow recording using Vista, > > its > > former ability to separate out software speech and record only the desired > > source has gone away with the new kernel driver. Has anybody successfully > > made a recording with it and maintained screen reader use? I can't figure > > out how to do it. > > > > Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
