Dan, Go into the record dialog with control+r.
shift tab until you get to a combo box called "method". It should be set to normal. Do not set it to one of the automatic settings because one of those will automatically end recording after a fixed time which, in your case, was 10 minutes. However, it is a useful function if you are doing something like unattended recording from a cassette and you want the recording to finish after 45 minutes. Hope this helps Bob Nelson ----- Original Message ----- From: "dan thompson" <[email protected]> To: "PC Audio Discussion List" <[email protected]> Sent: Sunday, March 07, 2010 1:54 AM Subject: soundforge recording question for conferences Hi All, Yesterday I attempted to use Sound Forge 9.1 on an hp laptop using win-xp to record a phone conference. The recording stopped after around 5 or ten minutes. The meeting was around 1.5 hours. I didn't know this until checking after the mmetting was over. I fortunatly had a victor stream as backup. The steps I used for recording were. 1. Press control plus r. 2. Press alt plus r to start recording. 3. Press escape to stop the recording. 4. Pressed the spacebar to listen to the recording and only 5 to ten minutes was there. What is the maximum for recording with Soundforge and what did I do wrong? We would actually like to use this process for recording in the future. Thanks for any help in advance. I thought To unsubscribe from this list, send a blank email to: [email protected] To unsubscribe from this list, send a blank email to: [email protected]
