Thanks very very much Bopb. I will check that.
----- Original Message -----
From: "Robert Nelson" <[email protected]>
To: "PC Audio Discussion List" <[email protected]>
Sent: Saturday, March 06, 2010 2:10 PM
Subject: Re: soundforge recording question for conferences
Dan,
Go into the record dialog with control+r.
shift tab until you get to a combo box called "method".
It should be set to normal.
Do not set it to one of the automatic settings because one of those will
automatically end recording after a fixed time which, in your case, was 10
minutes. However, it is a useful function if you are doing something
like
unattended recording from a cassette and you want the recording to finish
after 45 minutes.
Hope this helps
Bob Nelson
----- Original Message -----
From: "dan thompson" <[email protected]>
To: "PC Audio Discussion List" <[email protected]>
Sent: Sunday, March 07, 2010 1:54 AM
Subject: soundforge recording question for conferences
Hi All, Yesterday I attempted to use Sound Forge 9.1 on an hp laptop using
win-xp to record a phone conference. The recording stopped after around 5
or ten minutes. The meeting was around 1.5 hours. I didn't know this
until
checking after the mmetting was over.
I fortunatly had a victor stream as backup.
The steps I used for recording were.
1. Press control plus r.
2. Press alt plus r to start recording.
3. Press escape to stop the recording.
4. Pressed the spacebar to listen to the recording and only 5 to ten
minutes was there.
What is the maximum for recording with Soundforge and what did I do wrong?
We would actually like to use this process for recording in the future.
Thanks for any help in advance.
I thought
To unsubscribe from this list, send a blank email to:
[email protected]
To unsubscribe from this list, send a blank email to:
[email protected]
To unsubscribe from this list, send a blank email to:
[email protected]
