On 7/4/11, Joe Paton <[email protected]> wrote:
> Carlos,
>
> Ok. Think about what you want to do. Obviously you want to record,
> using the PC. You'll want the most input resources available to
> you. Line-in, stereo mix, .wav and whatever else your sound card supports.
>
> Capturing the audio, in which ever form, can be done by most
> recording software, that is not the end of the matter.
>
> You might need or want, or have to edit some recordings. For most
> processes, goldwave has full keyboard support, and integrates with
> most major screen readers to a greater or lesser extent; I.E there
> may be scripts or setfiles to improve access, but these are not
> necessary when you understand the audio software you are running and
> have a good working knowledge of the screen reader in use.
>
> If itr's straight recording, with little edditing, then mp3 direct
> cut will facilitate the recording of audio with .mp3 files as the
> output file format. This is free, but cutting, copying, pasting,
> equalizing only the volume fading in/out is just about it with mp3
> direct cut. but it's fairly straight forward, and will capture and save
> audio.
>
> Goldwave, Sound forge, record all and total recorder are but a few
> audio editing packages which give reasonable access .
>
> The goldwave dev. team are always responsive to the needs of screen
> reader/magnifier users, and will take on board, then modify or repair
> elements if they are broken, or just not accessible; That is worth
> paying fifty or sixty canadian dollars for in my opinion.
>
> Sony's sound forge, although you didn't mention this, is extremely
> powerful, and is the highest price tag.
>
> In earlier versions, care needed to be taken with the total recorder
> drivers, because they conflicted or isolated other required sound
> drivers. This was not difficult to fix, but caught a few of us on
> the hop when things that used to work no longer worked. This issue
> may have been resolved for further stable releases of the software,
> other list contributors can confirm or not this situation.
>
> If however you want to multi track record, then probably up for
> consideration must be the Reaper multi track recorder; This is where
> there are say a drum track, then a bass track, keyboard track, main
> vocal track and say 3 harmony vocals. So you can then play and edit
> each of these 7 audio source tracks till you have what you want, then
> mix them together, and save the project down to an audio file format.
>
> Reaper is not free, but I think the rae pluggin for better access is.
>
> This is also a considerable learning curve, so be prepared to listen
> to pod casts, and read the manual.
>
> Going back to goldwave, the manual is brilliant. In .html format,
> navigation and searching and locating results is a breeze when you
> understand your web browser and how to use the screen reader for
> navigating .html documents.
>
> Audacity is free I think, I don't have much experience of this though.
> sorry this is a little sketchey.
>
> Just some thoughts for you, and good luck.
>
> Joe Paton
>
> APART Consultancy Limited,
>
> tel.: 0044 1702 543 624.
> http://www.apart.org
>
>
>
>
>
>
>
>
>
>
>
> .
>
>
> At 13:52 03/07/2011, you wrote:
>>Hello Listers,
>>
>>I am very new at using audio programs. So will someone please tell me the
>>difference between Totle Recorder and GoldWave? For example: can either of
>>these programs be used for taking dictation? I will be needing to do that
>> in
>>the near future.
>>
>>Please, if you can just tell me what each program main features are, I
>> would
>>greatly appreciate that.
>>
>>Tnanks!
>>
>>
>>
>>Carliss
>>
>>To unsubscribe from this list, send a blank email to:
>>[email protected]
>
>
> To unsubscribe from this list, send a blank email to:
> [email protected]
>
hai
if any one having the tuterial regarding total recoarder so please send it.
--
shushant bendre physio therepist from pune camp mobil :9373798593 e
mail id same above or shan .dpt @hotmail.com thanque for reeding this
mail
{ammabhagavansharenum}
To unsubscribe from this list, send a blank email to:
[email protected]
