andre use the screw that holds the yeti in place. use that screw to attach
the filter to the yeti.
----- Original Message -----
From: "André van Deventer" <andred...@webafrica.org.za>
To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
Sent: Monday, September 16, 2013 3:27 PM
Subject: RE: installing a pop filter
Tim
I tried to install it by removing the original screw that holds the yeti in
place. Thisis what I understand from what you are saying.
But that iron bracket only has a hole on one side. Also the bracket is just
a few millimetres too small so that you cannot fit it inside the bracket to
turn the screw through the bracet into the microphone itself.
Am I doing something wrong?
-----Original Message-----
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of tim
cumings
Sent: 16 September 2013 09:02 PM
To: PC Audio Discussion List
Subject: Re: installing a pop filter
Content preview: Andre I think as long as it will stay in one place while
you're
using the microphone it may work fo you. ----- Original Message -----
From:
"André van Deventer" To: "'PC Audio Discussion List'" Sent: Monday,
September
16, 2013 2:59 PM Subject: RE: installing a pop filter [...]
Content analysis details: (-2.3 points, 5.0 required)
pts rule name description
---- ----------------------
--------------------------------------------------
0.4 STOX_REPLY_TYPE STOX_REPLY_TYPE
0.0 FREEMAIL_FROM Sender email is commonly abused enduser mail
provider
(thcumings[at]comcast.net)
-0.0 SPF_PASS SPF: sender matches SPF record
-0.8 RP_MATCHES_RCVD Envelope sender domain matches handover relay
domain
-0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no
trust
[76.96.62.96 listed in list.dnswl.org]
-1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1%
[score: 0.0000]
-0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from
author's
domain
-0.1 DKIM_VALID Message has at least one valid DKIM or DK
signature
0.1 DKIM_SIGNED Message has a DKIM or DK signature, not
necessarily valid
X-Spam-Flag: NO
X-BeenThere: pc-audio@pc-audio.org
X-Mailman-Version: 2.1.15
Precedence: list
Reply-To: PC Audio Discussion List <pc-audio@pc-audio.org>
List-Id: PC Audio Discussion List <pc-audio_pc-audio.org.pc-audio.org>
List-Unsubscribe:
<http://pc-audio.org/mailman/options/pc-audio_pc-audio.org>,
<mailto:pc-audio-requ...@pc-audio.org?subject=subscribe>
List-Post: <mailto:pc-audio@pc-audio.org>
List-Help: <mailto:pc-audio-requ...@pc-audio.org?subject=lp>
List-Subscribe:
<http://pc-audio.org/mailman/listinfo/pc-audio_pc-audio.org>,
<mailto:pc-audio-requ...@pc-audio.org?subject=bscribe>
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=so-8859-1"; Format=lowed"
Errors-To: pc-audio-boun...@pc-audio.org
Sender: "Pc-audio" <pc-audio-boun...@pc-audio.org>
X-OutGoing-Spam-Status: No, score=.7
X-AntiAbuse: This header was added to track abuse, please include it with
any abuse report
X-AntiAbuse: Primary Hostname - hwa2.ultrahost.us
X-AntiAbuse: Original Domain - webafrica.org.za
X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12]
X-AntiAbuse: Sender Address Domain - pc-audio.org
X-Get-Message-Sender-Via: hwa2.ultrahost.us: acl_c_authenticated_local_user:
mailman/mailman
Andre I think as long as it will stay in one place while you're using the
microphone it may work fo you.
----- Original Message -----
From: "André van Deventer" <andred...@webafrica.org.za>
To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
Sent: Monday, September 16, 2013 2:59 PM
Subject: RE: installing a pop filter
Tim
I have it screwed to the back of the flat stand but it seems not to be very
sturdy?
-----Original Message-----
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of tim
cumings
Sent: 16 September 2013 08:11 PM
To: PC Audio Discussion List
Subject: Re: installing a pop filter
Content preview: andre attach it either on the lift or right side of the
mic
stand using the bolt that comes with the yeti.The pp filter should be
oriented
in front of the logo on the ble yeti. to the ----- Original Message
-----
From: "André van Deventer" To: Sent: Monday, September 16, 2013 1:33 PM
Subject:
installing a pop filter [...]
Content analysis details: (-2.3 points, 5.0 required)
pts rule name description
---- ----------------------
--------------------------------------------------
0.4 STOX_REPLY_TYPE STOX_REPLY_TYPE
0.0 FREEMAIL_FROM Sender email is commonly abused enduser mail
provider
(thcumings[at]comcast.net)
-0.0 SPF_PASS SPF: sender matches SPF record
-0.8 RP_MATCHES_RCVD Envelope sender domain matches handover relay
domain
-1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1%
[score: 0.0000]
-0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from
author's
domain
-0.1 DKIM_VALID Message has at least one valid DKIM or DK
signature
0.1 DKIM_SIGNED Message has a DKIM or DK signature, not
necessarily valid
-0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no
trust
[76.96.62.40 listed in list.dnswl.org]
X-Spam-Flag: NO
X-BeenThere: pc-audio@pc-audio.org
X-Mailman-Version: 2.1.15
Precedence: list
Reply-To: PC Audio Discussion List <pc-audio@pc-audio.org>
List-Id: PC Audio Discussion List <pc-audio_pc-audio.org.pc-audio.org>
List-Unsubscribe:
<http://pc-audio.org/mailman/options/pc-audio_pc-audio.org>,
<mailto:pc-audio-requ...@pc-audio.org?subject=subscribe>
List-Post: <mailto:pc-audio@pc-audio.org>
List-Help: <mailto:pc-audio-requ...@pc-audio.org?subject=lp>
List-Subscribe:
<http://pc-audio.org/mailman/listinfo/pc-audio_pc-audio.org>,
<mailto:pc-audio-requ...@pc-audio.org?subject=bscribe>
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=so-8859-1"; Format=lowed"
Errors-To: pc-audio-boun...@pc-audio.org
Sender: "Pc-audio" <pc-audio-boun...@pc-audio.org>
X-OutGoing-Spam-Status: No, score=.7
X-AntiAbuse: This header was added to track abuse, please include it with
any abuse report
X-AntiAbuse: Primary Hostname - hwa2.ultrahost.us
X-AntiAbuse: Original Domain - webafrica.org.za
X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12]
X-AntiAbuse: Sender Address Domain - pc-audio.org
X-Get-Message-Sender-Via: hwa2.ultrahost.us: acl_c_authenticated_local_user:
mailman/mailman
andre attach it either on the lift or right side of the mic stand using the
bolt that comes with the yeti.The pp filter should be oriented in front of
the logo on the ble yeti.
to the
----- Original Message -----
From: "André van Deventer" <andred...@webafrica.org.za>
To: <pc-audio@pc-audio.org>
Sent: Monday, September 16, 2013 1:33 PM
Subject: installing a pop filter
Hi all
I have blue's universal pop filter for my yeti usb microphone.
Can any one give me any advice on how to install it?
I know that this is not a wind filter. But where exactly on the microphone
must you put it?
Can anyone help here?
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
