Hello Danny, In order to receive the scripts for Sound Forge, send an email to Jim Snowberger at:
[email protected]. He charges $30, and he's a great guy. Hope this helps. Tina -----Original Message----- From: Pc-audio [mailto:[email protected]] On Behalf Of Danny Miles Sent: Tuesday, March 10, 2015 12:15 PM To: PC Audio Discussion List Subject: Re: Editing Mouth Noise and Braille Display Clicks Hi Jamie. Thanks for your message. I'm using a Shure SM58, which I understand to be one of the most commonly-used all-purpose vocal mics. I plug my mic into a mixer rather than using a USB mic ... do you have any better suggestions? I do use a pop shield, so I don't have issues with plosives, but the Braille display and mouth noises seem more evident than I expected. Also, I wasn't aware that there were Jaws scripts for Sound Forge. I used SF before I started with GoldWave many years ago and, generally, I think GoldWave works just as well. However, if you can please advise on how to obtain the scripts for SF it might be worth contemplating. Many thanks, Danny On 3/10/15, Jamie Kelly <[email protected]> wrote: > > You could try Sound Forge and with the Jaws scripts you can use the > EQ, shift and pitch sliders Etc. > > If you have some vision, Adobe Audition is very good also if it's > still available. Both these programs cost around $300 to $400 each. > > Also look at the type of mike your using. > > Jamie > > -----Original Message----- > From: Pc-audio [mailto:[email protected]] On Behalf Of > Danny Miles > Sent: Tuesday, 10 March 2015 9:09 PM > To: PC Audio Discussion List > Subject: Editing Mouth Noise and Braille Display Clicks > > Hello everyone. I wonder if anybody can please advise. > > I currently record using a broadcasting encoder and edit my content > using GoldWave. However, I'm having significant issues with the > presence of mouth clicks and the constant sounds of my Braille display > as I move from line to line (or as the cursor flashes). > > I find that GoldWave's editing options are generally too weak to have > any impact or too aggressive to leave a high-quality recording. I > currently have Depopper; could this be used to remove the issues > described above (and also the hiss of room ambience)? If so, any > advice on particular settings would be appreciated. If not, can > anybody please make any other suggestions? > > Many thanks, Danny > > > > --- > This email is free from viruses and malware because avast! Antivirus > protection is active. > http://www.avast.com > > >
