Will try that, thanks.
Original message:
Hi Georges,


After you open the file:

1. press the letter b.

2. Press the spacebar and listen until you hear the start of what you want to keep.

3. press the letter n then spacebar.

4. Press the number 3 ten times or so, to move back through the file.

5. Press f8 to hear where the start would be if you press delete.

6. Press 3 if you need to move back further or 4 if you would like to remove more. Press f8 to check.

7. Once you are happy with the starting position, press delete, then save your changes by pressing ctrl+w.

Regards,
Barry Chapman

-----Original Message-----
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Georges Zaynoun
Sent: Monday, 4 September 2017 12:38 PM
To: pc-audio@pc-audio.org
Subject: Re: appending files with mp3 direct cut

Thanks for this but if I want to trim just a little from the beginning
how to do that?
Original message:
Hi Ray,

The way I do it is:

1. Open the file you wish to append.

2. Select all and copy it to the clipboard with ctrl+a followed by ctrl+c.

3. Open the file you wish to append to. If you get a warning about the
first file, select no you don't want to save it.

4. Move to the end of the file by pressing the end key.

5. Press ctrl+v to paste from the clipboard.

6. You should be positioned where the append takes place, so you can
use your arrow keys to move back a little then press the spacebar to
play across the join.

7. If you need to cut a bit to make it a clean append, you can use the
b and n keys to mark the section you want to delete. Use the numbers 1
and to to adjust the starting point back or forward and the 3 and 4
keys to adjust the end. Press f9 to hear what it sounds like across the join.

Regards,
Barry Chapman


-----Original Message-----
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Ray
T. Mahorney via Pc-audio
Sent: Monday, 4 September 2017 11:03 AM
To: pc-audio@pc-audio.org
Cc: Ray T. Mahorney <mahorney....@googlemail.com>
Subject: appending files with mp3 direct cut

Have any of you folks played with this and how do you make it happen.
I’ve opened one file but I see no way to append to the end of that file
as the tutorial suggests. What am I missing?
Ray T. Mahorney
WA4WGA

Ray T. Mahorney
WA4WGA

--
Georges Zeinoun
Timmerv. 6A ITR LGH1102, 54163 SKÖVDE    SWEDEN
Tel: +46 (500) 48 29 29 +46 (500) 43 55 11

--
Georges Zeinoun
Timmerv. 6A ITR LGH1102, 54163 SKÖVDE    SWEDEN
Tel: +46 (500) 48 29 29 +46 (500) 43 55 11

Reply via email to