The following errata report has been held for document update for RFC6006, "Extensions to the Path Computation Element Communication Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths".
-------------------------------------- You may review the report below and at: http://www.rfc-editor.org/errata_search.php?rfc=6006&eid=3836 -------------------------------------- Status: Held for Document Update Type: Editorial Reported by: Udayasree <[email protected]> Date Reported: 2013-12-13 Held by: Adrian Farrel (IESG) Section: 3.13 Original Text ------------- The F-bit is used in the RP object header to signal that the initial request or response was too large to fit into a single message and will be fragmented into multiple messages. Corrected Text -------------- The F-bit is used in the RP object to signal that the initial request or response was too large to fit into a single message and will be fragmented into multiple messages. Notes ----- F-bit is used in the RP object body but not the object header -------------------------------------- RFC6006 (draft-ietf-pce-pcep-p2mp-extensions-11) -------------------------------------- Title : Extensions to the Path Computation Element Communication Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths Publication Date : September 2010 Author(s) : Q. Zhao, Ed., D. King, Ed., F. Verhaeghe, T. Takeda, Z. Ali, J. Meuric Category : PROPOSED STANDARD Source : Path Computation Element Area : Routing Stream : IETF Verifying Party : IESG _______________________________________________ Pce mailing list [email protected] https://www.ietf.org/mailman/listinfo/pce
