>
> > The ZIF has four settings for 66, 75, 83 and 100 MHz bus speeds. None
> > directly correlating with my lowly 9500.... So I set it to 66 MHz
> > settings.
>
> I think you're a bit confused about those dip switch settings. They do
> *NOT* set the bus speed, they set the bus multiplier. On a 400 MHz ZIF
> the setting you thought was for 66 MHz is actually for 6X bus ratio.
Actually, what I said was that the four settings are FOR the four different
bus speeds not that they set the bus speeds. This is what the Newer
paperwork says.....
>
> I used a NewerTech 450/466 G3 ZIF with a XLR8 Carrier in my PowerCenter,
> and the XLR8 Carrier set the bus speed - I just had to figure out how to
> set the bus ratio on the ZIF.
Right, this is what I'm looking for. I tried a couple different settings on
the ZIF and came up nada. I kicked the card up until it was unstable.....
> NewerTech assumed the ZIF would only be
> used on a G3 mobo using 66 MHz or 100 MHz bus, so their documentation
> only included switch settings for 6X (466 MHz in Beige G3) and 4.5X (450
> MHz in B/W G3). IIRC, I found the proper settings for 6.5X and 7X
> through trial and error. Wish I had written them down, but....
:)) ....help!
>
>
> --
> Gene, a.k.a. G-Man
> Friends don't let friends do Windows
Tim
--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Macintosh? Get free email and more at Applelinks!
<http://www.applelinks.com>
