Bill Hatchell10/21/01 1:13 [EMAIL PROTECTED][wrote] > Have a modified 7600/132 (upgraded to 604e/200) with 128 Mb RAM, running > OS8.6. Getting no sound output except via connecting external speakers to > the speaker port on back. Checked internal speaker wiring and it is > connected to the mobo near the on/off switch so this is apparently not the > problem. Are there other audio wires/connectors that should be checked? I > do spot another "sound/audio" connector on the side of the mobo opposite > from the speaker connection. What is this? Any obvious things to check > considering sound comes from externally connected speakers but not from the > internal speaker (with external speakers disconnected)? Many thanks. > -B > Check the speaker. Disconnect speaker from MB. Use Multimeter on RX1 ohm scale. Should read 4 ohm to 16 ohm. You should hear scratchy sound in speaker as you make and break contact. DO NOT apply multimeter to MB. jr
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
