Thanks, I'll check if that is possible on this IBM drive. Ronald Romine wrote: > > >Problem: IBM SCSI 9GB HDs not mounting on 7600. > > >However, neither drive will mount on the 7600 (which does not have FWB > >HDT installed). Drive Setup 1.9.2 and 2.0.3 - and System Profiler- can > >"see" the IBM 9GB HDs (one set to SCSI address #6, one to SCSI #1). > >Drive Setup can update the drivers, then I restart, do a low-level > >format as one volume, HFS+, and they will appear on the desktop. They > >then behave as normally mounted disks but as soon as I restart they do > >not show up. Run SCSI Probe 5.2 and they are seen - ID: 6; Vendor > >IBM-PSG; Product DNES-309170W !#; Vers SABO) - but cannot be mounted. > > I recently purchased three 9GB HD's (ST410800N), which had the same problem. > > The problem was the jumper was set on the "Motor Start Option Enable". > > With this option enabled, the drives would power up, but not mount > until "accessed". > - Ron. > Giles Hugo [EMAIL PROTECTED]
"I don't wear ties - they restrict the blood flow." - Steve Jobs -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | PowerON Computer Services <http://www.poweron.com> REPLACEMENT PARTS in STOCK Drives, CD-ROMs, RAM, Mac OS SW, Power Supply <mailto:[EMAIL PROTECTED]> Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
