I don't know if this is helpful, but I had a similar experience with my
9150/120 after putting in a nubus ethernet card. I would get the startup
chimes, then nothing. I had used a different nubus ethernet card previously
with no problems. When I switched back all was well again.
So my guess is that one of the adapters you are using may not be liked
by the 7300. Try pulling them one at a time to see what happens.
David
> Hi All:
>
> I just finished putting a 7300/200 Motherboard, 64MB Ram in 8 sticks,
> 604/150 Processor, Apple PCI 10/100 Ethernet Card, a ATI Xclaim 3D, and
> a 256K Cache memory together, and am having a problem. I am using the
> video card as my display. I know it works, because I tested it in
> another PCI Powermac. I know the memory works. When I power it on, I
> get the music it always makes, just no more. I do not get any display,
> and after the hard drive spins up, it does no more. Am I doing
> something wrong here?? I do not have a ROM chip. Could that be it??
> Please help me!!
>
> Thanks,
> David
>
>
--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
SPECIAL LIST PRICES - Apple PCI Video Cards from $19.99, MacOS 8.5 CD $79.99
Replacement Parts IN STOCK, Apple CDROMs from $19.99 <mailto:[EMAIL PROTECTED]>
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
