On Sunday 19 May 2002 10:59, you wrote: > >I have a pc Adaptec 2940 UW card which works perfectly in my 8600. I had > > to flash the firmware (to Mac Power Domain 2940 UW) to make it work. > > Other than that, no drivers were required. > > > >MJF > > How do I flash the firmware? > > Greg
In my case I downloaded the firmware flashing utility (for the 2940UW, Power Domain) from Adaptec's site. Earlier in this thread I became curious and looked on the 2930 page and saw that there was no firmware update there for that card, only drivers, which you already have right ? In the event that you don't they're here: <http://www.adaptec.com/worldwide/support/drivers_by_product.html?cat=/Product/APD-2930U> AFAICT, the 2930CU that you have is this card here: <http://www.adaptec.com/worldwide/support/drivers_by_product.html?cat=/Product/AHA-2930CU> MJF -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
