I recently picked up a 9500/132 and am getting ready to make it my main Mac. Here is the problem:
I just picked up a Powerlogix G3 400/200/1meg cache card and the machine hangs on startup. I get the startup chime, but then the system freezes even before the monitor gets signal from the video card (an ATI Xclaim). I have a 128 meg ram stick in it. I have tried setting the card to it's rated specs-50 mhz bus, 8X multiplier for 400 mhz rating on the G3 and also stepping down the bus to 40mhz with the 8x multiplier, but no help. I cant even reset the pram- the macine freezes too soon. I have pressed the Cuda also. The system works fine with the original 132Mhz card. Of Course this is a long weekend and no one is at Powerlogix tech support. Any ideas anyone?? Thanks, Len -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
