Vern Andrews wrote: > After installing my new ATA card, finally got both internal IDE HDs to work along > with the original internal SCSI 1MB HD. Can't boot from the IDE drives though, only > from the SCSI HD (even after selecting another HD using System Disk).
Did you set one HD as the master and the other as the slave when you connected them both to one bus of the card, or did you set them both as master, but then connected to both busses separately ? I've heard that all ATA cards are bootable so it should work. BTW which ATA card did you buy, the Acard, Sonnet or SIIG UATA/100/133 card? -- Marc van Gemert | MacSonar Support Team | Webmaster MacSonar http://www.MacSonar.net | mailto:[EMAIL PROTECTED] -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
