> I have set the switches >to 6,7,8,9 and can't find (or figure out where) the jumpers are they refer >to on their web site.
The jumpers (if present) would have been on the ZIF that originally shipped with the carrier. Switches 1-8 set the card's RAM to CPU bus speed.Switches 9-12 along with four jumpers on the CPU (if available) determine the ratio of the CPU multiplier. Try setting the switches like this, on:1,2,6,7,11. The CPU should then be running at 233MHz with a bus speed of 46.6MHz. It should boot if everything is ok. If it does you can experiment with other settings. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
