[EMAIL PROTECTED] wrote:
> I just swapped my Xclaim 3D Plus video card from a 7500 to my 8600 with
> a G3/300 upgrade card. All works fine except on start-up and restart.....
>
> .....The video card worked perfectly in the 7500 machine with the keyboard
>
> power key.
>
> Grateful for any ideas or fixes.
> Sam
Double check your connections and make sure they are tight. I ran into a
problem like this once and couldn't figure out the erratic-ness of it. Then
I finally noticed that the hanging cable from the tower was pulling on the
pci card and not allowing a solid connection. Are all your screws in and
snug?
--
Tim
1st/pci-pm list nanny
[EMAIL PROTECTED]
--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
