Here are a couple of things to check: Does the monitor control panel show more than 1 available setting? Is their a choice for "All" or only for "Recommended" under Resolutions?
Does the video adapter have switches? If so, you will probably need to find the proper setting for the desired resolution. ( shut off the computer while moving the switches.) If not and you only have one choice under the "Recommended" Resolutions, the adapter is only allowing the default resolution. David Allen Garry Hamblin wrote: > Hi, I have a 7300/180 with PC compatibility card [also 384m Ram, 2m > video, 16m on the PC side] running a Maginnovision 15" monitor through a > Viewsonic adapter. This unit runs OS 8.1. I would like to run the > monitor in 800X600 resolution but this is unavailable as a choice in the > 'Monitors and Sound' control panel. I am certain this model will do > this resolution, but I am missing something somewhere. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
