> dhill wrote: > Just acquired a 7500 and a 6400. I want to put more memory > in them and would bow to the expertise of this list of the specific > type of memory needed for each of these. I want to max the 6400 out > with 64s and probably put 2 - 128s in the 7500. > Eugene answered: The 7500 can take EDO or FPM memory. It should be 168 pin 5volt DIMMs. I like to get my RAM from
www.OtherWorldComputing.com Subscribe to their mail list for price reductions. The 6400 will take the same as above, 'cept specs say needs 2K refresh ... 7500 will accept 4K refresh ... If you don't put a L2 G3 in the cache slot, be sure and get a L2 cache (up to 1MB) for the 6400. If you haven't been there already, try this site; http://www.zone6400.com/ Good stuff for 6400 and family ... Jerry -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
