Along those same line...I've got a WD (WDE 2170) SCSI-3 68-pin 2.1G drive I'm trying to install on my PM7500. I booted to an OS9 CD & ran the drive setup. It sees the drive on the correct SCSI ID but says the drive is unsupported and will not initialize. Before I start scouring the web, thought I'd start here first.
The drive jumpers are set to: TERM PWR, SCSI TERM, & SCSI ID 0 Any thoughts? Eric -----Original Message----- From: PCI PowerMacs [mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] Sent: Monday, December 02, 2002 6:10 PM To: PCI PowerMacs Subject: Re: Fujistu 9GB -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
