on 12/12/02 6:50 PM, Jeff Walther at [EMAIL PROTECTED] wrote: > On the x100 series, the whatever is at the other end of your ethernet > cable needs to be active when you power up the machine. So, if > you're using a hub, no problem, just leave the hub on all the time. > If you're using a cross over cable to another machine, that other > machine needs to be turned on first. Of course, you may have some > other problem, but what I've described has bitten a lot of people in > the past.
You nailed it! Thanks! Ron -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
