> > >As usual, I need a little help here. I bought a Sanyo scsi cd-rw >recently, and just got around to installing it in my 9600 I set the >scsi id to 1, and set the parity >jumper to off. The burner is listed in ASP with the correct id, and the >driver is stated as "unknown". However, the unit will not read a cd. I >was under the assumption that in read-only mode, the os would provide >the driver for the unit.
you will maybe need the toast, you will need something else than appleones, my cdrw needs toast and it can NEVER boot a systemcd,with or without the toast drive, to get it to read at all you need the toast drive and 1 time you must also install the applecd/dvd drive restart so that the cd controll program will be created in the preferences, it wont work with the applecdplayer otherwise and possible there are a few other things that did not run without that little control program, kenta -- -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
